Hardware Manual

Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-22

Saia-Burgess Controls AG

PCD2.G410

Input/output (I/O) modules

5

LEDs and connection terminals

The terminal numbering refers to the use of the module on sockets 1 ... 4 (top) on

the PCD2. If the module is installed on sockets 5 ... 8 (bottom), the value 64 must be

added to the addresses given. When using the module in the PCD2.C100 expansion

housing, the same logic applies, with the value 128 to be added to the ‘top’ and 192

to the ‘bottom’.

CO 0 ME 10 E 21 E 32 E 43 E 54 E 65 E 76 8 9 E 09 E 1102 E 312 E 413 E 514 E 6157 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9

A (^16) - --- A 32 A 33 A 34 A 35 E 48 E 49 - ---
E 610 A 200 W 410 W 2 ..
E 7 E 8 E 11 A^17 A^18 A^19 - --- E 50 E 51
Uext
Q S
U
I
Jumper Config.
T U I
Factory settings: E0 ... E15 Source operation: Q
A32 ... A35 Voltage: 0 ... 10 V “U”
E48 ... E51 Voltage: 0 ... 10 V “U”