Hardware Manual

Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-22

Saia-Burgess Controls AG

PCD2.W3x5

Input/output (I/O) modules

5

Programming

Classic: For programming the modules, an FBox is available.

xx7 and RIOs: the firmware reads in the values according to the configuration

(I/O Builder or network configurator)

Watchdog: This module can be used on all base addresses; there is no interaction

with the watchdog on the CPUs. For details, please refer to the “Watchdog”

section, which describes the correct use of the watchdog in conjunction with PCD2

components.