Hardware Manual

Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-22

Saia-Burgess Controls AG

PCD2.H31x

Input/output (I/O) modules

5

*) Balancing output voltage is carried out in the factory. The user is strongly advised

not to adjust the tuning potentiometer.not to adjust the tuning potentiometer.not to adjust the tuning potentiometer.

5 V supply for 5 V encoder for PCD2.H311

5 V output: 5 V supply of encoder

Short circuit protection: yes

Electrical isolation: no

Output voltage: 5 V

Max. load current: 300 mA

Short circuit current: 400 mA (this current also loads the PCD’s +5 V bus) the PCD’s +5 V bus)

Power supply

Internal current consumption:

(from +5 V bus)from +5 V bus)

max. 140 mA

typically 125 mA

Internal current consumption:

(from V+ bus)

0 mA

External current consumption: max. 15 mA, typically 10 mA, residual ripple max. 10 %

Operational conditions

Ambient temperature operation: 0 ... +55 °C without forced ventilation,

storage: -20...+85 °C-20...+85 °C-20 ... +85 °C

Noise immunity: EC mark according to EN 61 000-6-3 and EN 61 000-6-2

Programming: Based on PCD user program and pre-programmed function

blocks (FB).

Terminals: Pluggable 10-pole screw terminal block

(4 405 4847 0), for wires up to 1.5 mm²