Fundamentals of Drawing Engineering Design with SOLIDWORKS® 2016
- Click OK from the Spline PropertyManager. The Crop View is
displayed on Sheet1.
Display the Temporary Axes and insert a sketched centerline.
185) Click inside the Auxiliary view boundary. The Auxiliary
PropertyManager is displayed.
Click View, Hide/Show, check Temporary Axes from the Menu
bar. The Temporary Axis for the Guide Hole is displayed.
Click Sketch tab from the CommandManager.
Click the Centerline Sketch tool. The Insert Line
PropertyManager is displayed.
Sketch a centerline parallel above the Temporary axis. The
centerline extends approximately 5mm to the left and right of the
profile lines. I f needed insert a Parallel relation to the temporary
axis.
Right-click Select to deselect the Centerline Sketch tool.
Add a Collinear r elation between the centerline and temporary axis.
191) Click the centerline. The Line Properties PropertyManager
is displayed.
Hold the Ctrl key down.
Click the Temporary Axis. The mouse pointer displays the
Axis feedback icon. The Properties PropertyManager is
displayed. Axis<1> and Line1 are displayed in the Selected
Entities box.
Release the Ctrl key.
Click Collinear from the Add Relations box.
Click OK from the Properties
PropertyManager.
Hide the Temporary Axis.
197) Click View, Hide/Show, uncheck
Temporary Axes from the Menu bar.
Move the views to allow for ample
spacing for dimensions and notes.