Fundamentals of Drawing Engineering Design with SOLIDWORKS® 2016
The holes in the Auxiliary view require a
diameter dimension and a note to represent
the six holes. Use the Hole Callout to
dimension the holes. The Hole Callout
function creates additional notes required to
dimension the holes.
The dimension standard symbols are displayed automatically
when you use the Hole Wizard feature.
Activity: Dimension Holes and the Hole Callout
Dimension the Linear Pattern of Holes.
241) Click the Annotation tab from the CommandManager.
Click the Hole Callout t ool. The Hole Callout tool
inserts information from the Hole Wizard.
Click the circumference of the lower left circle in the
Auxiliary view as illustrated. The tool tip M3x0.5 Tapped
Hole1 of GUIDE is displayed.
Click a position to the bottom left of the Auxiliary
view.
The Hole Callout text displayed in the
Dimension Text box depends on the options
utilized in the Hole Wizard feature and the Linear
Pattern feature.
Remove trailing zeroes for ASME Y14 millimeter display.
245) Select .1 from the Primary Unit
Tolerance/Precision box.
- Click OK from the Dimension
PropertyManager. The Hole Callout is
deactivated.
Display the Hole Wizard Callout information
automatically by selecting the Hole callout button
in the Model Items PropertyManager.