soil.
(4) Use a piece of sowing thread to tie the
plant to the stick at several points.
(5) Tape the stick to the pot.
(6) Tilt the plant on its side so that the top
of the pot with the soil is facing at an angle
towards the sink.
(7) Watch the colour of the liquid that runs
out.
(8) Do this until all the liquid has poured
through.
STEP B.
IF YOU HAVE HOLES AT THE BOTTOM OF THE POT USE
THIS METHOD OTHERWISE USE STEP C.
(1) Pull your plant back up and sit it in the
sink. Pour lots of water on top of the soil.
(2) Wait until the water flows out the bottom
of the pot. Look at the colour of the flow.
(3) Repeat this process until the colour of the
water becomes clearer. (The soil should get
very muddy when you do this and some of the mud
will pass out with the water.)
(4) Once the water is clear tilt your plant on
its side again and wait for all the water to
drain out. You may repeat this process several
times. If your feeding solution does not have a
