Use the round nose pliers to bend the part of the ball head pin with the crystal
and attach it to the other ring of the chain. After connecting the chain and the
loop, bend the loop down close to the bead. (Picture 13, 14, 15)
Helpful tip: To bend the end of the pin, we should grasp it near its end
and bend a loop close to the crystal. Round nose pliers are specially
designed to bend loops on stiff wires.
Picture 1 3Picture 14Picture 15
Thus, on the one end of the chain we have an ear wire loop and there is a
crystal on the other (Picture16).