Fine Woodworking 2007 Building Furniture

Top, ¾ in. thick by

125 ⁄ 16 in. wide by 32^5 ⁄ 8 in. long

Attach the feet. Miter each section and

glue the halves to each other, then the

whole foot to the bottom of the case.

Add glue blocks as reinforcement.

Stretcher,

¾ in. thick by

21 ⁄ 2 in. wide by

293 ⁄ 4 in. long;

lap,^5 ⁄ 8 in. long

Sides, ¾ in. thick by 10^1 ⁄ 4 in.

wide by 44^1 ⁄ 2 in. long

Face-frame stiles

and bottom rail,

¾ in. thick by

11 ⁄ 4 in. wide

Face-frame

top rail,

2 in. wide

Bottom, ¾ in.

thick by 9^7 ⁄ 8 in.

wide by 29^3 ⁄ 4 in.

long

Ogee bracket

foot

Flat rear

bracket

dovetailed

into ogee

section

Filler frame,

(^3) ⁄ 4 -in.-thick,
screws to
case bottom.
Bracket feet
frame, ¾ in.
thick by 3 in.
wide, screws to
filler frame.
Submolding,
(^3) ⁄ 4 in. thick by (^5) ⁄ 8 in. wide
(^3) ⁄ 4 -in. by (^3) ⁄ 4 -in.
glue block
Adjustable shelf, ¾ in. thick by
97 ⁄ 8 in. wide by 28^1 ⁄ 2 in. long,
has bullnose profile on front. Ship-
lapped
back
boards,
(^3) ⁄ 8 in.
thick by
441 ⁄ 4 in.
long
30 in. 11 in.
5 in.
¾ in.
Spline
reinforces
miters.
501 ⁄ 4 in.
Dovetail,
(^5) ⁄ 8 in. long
Slotted screw
hole at back
To allow for wood
movement, glue
front half of
molding only.
w w w. f i newood wor k i n g. c o m b u i l d i n g f u r n i t u r e 2 0 0 7^23
FWSIP08BF_TS.indd 23 6/8/07 4:14:12 PM