- FMAGSUM (Main Menu>General Postproc>Elec&Mag Calc> Component Based> Force) summarizes
electromagnetic force calculations on element components. - FOR2D (Main Menu> General Postproc> Elec&Mag Calc> Path Based> Mag Forces) calculates
magnetic forces on a body. - HMAGSOLV (Main Menu> Solution> Solve> Electromagnet> Harmonic Analys> Opt&Solv) specifies
2-D harmonic electromagnetic solution options and initiates the solution for a harmonic analysis. - IMPD (Main Menu> General Postproc> Elec&Mag Calc> Path Based> Impedance) calculates the
impedance of a device at a particular reference plane. - LMATRIX (Main Menu> Solution> Solve> Electromagnet> Static Analysis> Induct Matrix) calculates
the inductance matrix and the total flux linkage in each coil for an arbitrary set of coils. - MAGSOLV (Main Menu> Solution> Solve> Electromagnet> Static Analysis> Opt&Solv) specifies
magnetic solution options and initiates the solution for a static analysis. - MMF (Main Menu> General Postproc> Elec&Mag Calc> Path Based> MMF) calculates magneto-
motive force along a path. - PERBC2D (Main Menu> Preprocessor> Loads> Define Loads> Apply> Magnetic> Boundary>
Vector Poten> Periodic BCs) generat es periodic constraints for 2-D planar analysis. - PLF2D (Main Menu> General Postproc> Plot Results> Contour Plot> 2D Flux Lines) generat es a
contour line plot of equipotentials. - PMGTRAN (Main Menu> TimeHist Postpro> Elec&Mag> Magnetics) summarizes electromagnetic
results from a transient analysis. - POWERH (Main Menu> General Postproc> Elec&Mag Calc> Element Based> Power Loss) calculates
the RMS power loss in a conducting body. - RACE (Main Menu> Preprocessor> Modeling> Create> Racetrack Coil) defines a "racetrack" current
source. - SENERGY (Main Menu> General Postproc> Elec&Mag Calc> Element Based> Energy) determines
the stored magnetic energy or co-energy. - TORQ2D (Main Menu> General Postproc> Elec&Mag Calc> Path Based> Torque) calculates torque
on a body in a magnetic field. - TORQC2D (Main Menu> General Postproc> Elec&Mag Calc> Path Based> Circular Torq) calculates
torque on a body in a magnetic field based on a circular path. - TORQSUM (Main Menu> General Postproc> Elec & Mag Calc> Component Based> Torque)
summarizes electromagnetic Maxwell and Virtual work torque calculations on element components
for 2-D planar problems.
See Electric and Magnetic Macros in the Low-Frequency Electromagnetic Analysis Guide for more inform-
ation on magnetic command macros.
Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
Additional POST1 Postprocessing