Oil-Based and Bio-Derived Thermoplastic Polymer Blends and Composites 267
45 X. Li, L. G. Tabil, and S. Panigrahi, Chemical treatments of natural fiber for use in
natural fiber-reinforced composites: A review,J. Polym. Environ., 15 (1) 25–33 (2007).
46 G. Pritchard, Two technologies merge: Wood plastic composites Geoff Pritchard
describes how wood and resin are being,Plast. Addit. Compd., 48 (6), 18–21 (2004).
47 N. M. Stark and L. M. Matuana, Characterization of weathered wood-plastic
composite surfaces using FTIR spectroscopy, contact angle, and XPS,Polym. Degrad.
Stab., 92 (10) 1883–1890 (2007).
48 M. P. Wolcott, Wood-Plastic Composites, inEncyclopedia of Materials - Science and
Technology, 9759–9763 (2001).
49 C. Clemons, Wood-plastic composites in the United States: The interfacing of two
industries,For. Prod. J., 52 (6) 10–18 (2002).
50 M. Hietala, J. Niinimäki, and K. Oksman, Processing of wood chip–plastic
composites: Effect on wood particle size, microstructure and mechanical properties,
Plast., Rubber Compos., 40 (2) 49–56 (2011).
51 A. R. Sanadi and D. Caulfield, Thermoplastic polyolefins as formaldehyde free
binders in highly filled lignocellulosic panel boards: Using glycerine as a processing
aid in kenaf fiber polypropylene boards,Mater. Res., 11 (4) 487–492 (2008).
52 M. Valente, J. Tirillò, A. Quitadamo, and C. Santulli, Paper fiber filled polymer.
Mechanical evaluation and interfaces modification,Composites, Part B, 110 ,
520–529, (2016).
53 M.Kazayawoko,J.J.Balatinecz,andL.M.Matuana,Surfacemodificationand
adhesion mechanisms in woodfiber-polypropylene composites,J. Mater. Sci., 34 (24)
6189–6199, (1999).
54 N. Sombatsompop, C. Yotinwattanakumtorn, and C. Thongpin, Influence of type and
concentration of maleic anhydride grafted polypropylene and impact modifiers on
mechanical properties of PP/wood sawdust composites,J. Appl. Polym. Sci., 97 (2)
475–484 (2005).
55 S. M. B. Nachtigall, G. S. Cerveira, and S. M. L. Rosa, New polymeric-coupling agent
for polypropylene/wood-flour composites,Polym. Test., 26 (5) 619–628 (2007).
56 H. S. Kim, B. H. Lee, S. W. Choi, S. Kim, and H. J. Kim, The effect of types of
maleic anhydride-grafted polypropylene (MAPP) on the interfacial adhesion
properties of bio-flour-filled polypropylene composites,Composites, Part A, 38 (6)
1473–1482 (2007).
57 S. E. Selke and I. Wichman, Wood fiber/polyolefin composites,Composites, Part A,
35 (3) 321–326 (2004).
58 M.Tazi,F.Erchiqui,F.Godard,H.Kaddami,andA.Ajji,Characterizationof
rheological and thermophysical properties of HDPE-wood composite,J. Appl. Polym.
Sci., 131 (13) 1–11 (2014).
59 A. K. Bledzki, O. Faruk, Injection moulded microcellular wood fibre-polypropylene
composites,Composites, Part A, 37 (9), 1358–1367 (2006).
60 K.B.Adhikary,M.R.Islam,G.M.Rizvi,andC.B.Park,Effectofextrusion
conditions on the surface quality, mechanical properties, and morphology of cellular
wood flour/high-density polyethylene composite profiles,J. Thermoplast. Compos.
Mater., 26 (8) 1127–1144 (2012).
61 F.Mengeloglu,L.M.Matuana,FoamingofrigidPVC/wood-flourcomposites
through a continuous extrusion process,J. Vinyl Addit. Technol., 7 (3), 142–148
(2001).
