ISSUE 419 • GARAGE BUILD • 61
5
Remove the four 6mm bolts securing the stock
speedo mount to the bike.
2
Stock 2018 Bobber headlight
1
Stock speedo on the 2018 Indian Bobber.
3
Remove the six 6mm Allen bolts securing the headlight
cowl, three bolts per side.
4
Remove the headlight cowl.
6
Remove the stock speedo mount. At this point
you should place a towel over the tank in order to
protect the paint, we’ll be resting the speedo on
the tank for the next few steps.
8
Slide the speedo forward and out of the stock
mounting bracket.
7
Before being able to disconnect the main electrical
connector from the speedo you need to remove the
two T20 screws attaching the speedo to the stock
mounting bracket.
9
Now disconnect the main wiring harness form the
speedo and discard the stock speedo mount.