Australian 4WD Action - June 2018

CONTACT

SUPERPRO

W: http://www.superpro.com.au

BUILT TOUGH

SuperPro’s upper control arm

kits have been designed to

cover a range of vehicles to

suit every 4WDer. Most 4WD’s

have been decked out with bull

bars, winches, larger tyres

and rims, and often have a lift

in their suspension. With this

is mind, SuperPro engineered

their control arms to correct

the steering geometry of these

built-up rigs.

COMPLETE CONTROL

When vehicles are lifted above a

standard height they run out of

camber and caster adjustment,

but these arms come with

complete camber and caster

control and have been designed

to give your 4WD the best wheel

alignment settings and

increased clearance. These

arms are supplied with

adjustable ball joints, which

have been placed in a neutral

position to increase the strength

of the arm. The design of these

control arms reduces tyre wear

and allows the safety of the

vehicle to be maintained.

AUSSIE MADE

AND TESTED

These control arms are built

tough here in Australia, using

high strength grade Australian

steel. SuperPro worked with

OE, a genuine part

manufacturer in Australia, to

ensure these standards of

manufacture and genuine

quality were met. These arms

were rigorously tested in-car,

which resulted in an expanded

arm range that now delivers

+/- 2 degrees of camber

adjustment and between 0-3

degrees of caster adjustment.

This allows for the ultimate

alignment setting for a 2-inch

lifted vehicle.

SUPER SOLUTION

SuperPro’s upper control arms

provide better wheel alignment

settings, increased

articulation, better handling,

steering and traction off-road,

and increased clearance

between the arm and strut at

full droop. You can guarantee

you’ll get the perfect alignment

solution from SuperPro.

A fully adjustable solution!

SUPERPRO 4X4

UPPER CONTROL ARMS

WWW.4WDACTION.COM.AU