Coastal Kitchen
WWW.GATHERED.HOW/SIMPLYSEWING 37
CUTTINGOUT
SteponeFromFabricA:
CushionFrontandCushionBack: Usethefoam
padtodrawtwocirclesonthewrongside(WS)of
thefabric.Add1cm( ⁄ in)allaroundandcutout.
GussetStrip: Ourpadis 28cmindiameter.Towork
outhowmuchfabricyouneedforthegusset,
multiply 28 by3.14(Pi),whichis 87.92,roundupto
88,add2 fortheseamallowance= 90.Asourpad
is 3cmdeep,add2cmseamallowancetothe
depth– soourgussetstripis 5x90cm.Cutone
GussetStripaccordingtoyour measurements.
SteptwoFromFabricB:
PipingStrip: Asourpipingis togoarounda curve,
wecutstripsonthebias.Ourstripsare3.5cm(1 ⁄ in)
wide,whichis enoughtowraparoundourcord
andhave1cm( ⁄ in)seamallowance.Cutenough
stripstobethecircumferenceofthecushionpad
plus10cm(4in).Youwillneedtoassembletwo of
these strips to make two Piping lengths.
MAKINGTHEPIPING
SteponeCutthepipingcordinhalf.Takeone
PipingStripandfoldoveroneshortendtotheWS
by1cm( ⁄ in).Sandwichthecordinsidethestrip,
aligningthelongedges,pin,thenstaystitchto
hold.Startsewingapprox8cm(3 ⁄ in)fromthe
foldedendandstopsewing the same distance
from the other end.^01
Chair cushions
YOUWILLNEED
QFabricA:35x90cm*(14x36in)
- cushionfront,backandgusset
QFabricB:FQ45.5x56.8cm (18x22in) - pipingstrip
QPipingcord:2m(2 yd)
QRoundfoamseatpad
QMatchingsewingthread
QErasablefabricpen
QBasic sewing kit
FABRICUSED
ThefabricsusedarefromSailAway
byMakower.Forstockistsvisit
http://www.makoweruk.com
Harbour2206/1
Yachts 2210/Q
NOTES
QUsea 1cm( ⁄ in)seamallowance.
QWesewedourcushionusinga zip
foot.*Fabricneededdependson
thesizeofthefoampad.Ourpadis
28cm in diameter and 3cm deep.
ADDINGTHEPIPING
SteponePlacetheCushionFrontrightside(RS)up
andpinthecoveredpipingcordalltheway
aroundtheedge,startingattheendwiththe
foldedoverend,sothatthepipingis facing
inwardsandtherawedgesarealigned.
SteptwoPinuntilyougetaroundtothestart,
makesurethepipingfabricendoverlapsthe
beginningby2cm( in)orsoandcutofftherest.
StepthreeSplicethepiping cord ends so they
meetandentwine.^02
StepfourTu ckth ee n dintoth es t ar tan dp in.
StepfiveSewthepipingtotheCushionFrontall
thewayaround.Repeatsteps for the Cushion Back
circle and piping strips.
ADDINGTHEGUSSET
SteponeTaketh eG uss e tStr ipan dp inth et wo
shortendsRSfacing.Sewthenpressseamopen.
SteptwoTakethepipedCushionFrontandpin
theGussetStriptoit RStogether,aligningtheraw
edges.SewthegussettotheCushionFront.^03
StepthreeRepeattheabovestepstoaddthe
CushionBackbutleavea quarter or so unsewn, so
youcaninsertthefoampad.
StepfourTurnRSoutthenpushthefoampad
insidethecushioncover.Foldovertheunsewn
gussetedgetotheWSby1cm( ⁄ in)(soit matches
the sewn gusset) then close with a slip stitch.^04
01
03
02
04