THE CURE FOR ALL DISEASES
It is not possible to produce a resonant sound by pressing
harder on the skin, although you can make the pitch go higher. To
avoid confusion it is important to practice making probes of the
same pressure. (Practice getting the F-C-B-C# tune.)
Making Pure Water for Testing Purposes
Since the water you purchase is likely to have solvents in it
and since your tap water may be polluted with heavy metals and
since your (or a store's) filtration system may be clogged, it is
important to make your own pure water.
Purchase a “filter pitcher” made of hard, opaque plastic, not
the clear or flexible variety (see Sources). Fill the pitcher with
cold tap water, only, not reverse osmosis, distilled, or any other
water, since solvents do not filter out as easily as heavy metals.
The filter should be made of carbon only. To make test sub-
stances, use fresh water in the pitcher and pour.
If your water has lead, copper or cadmium from corroded
plumbing, the filter will clog in five days of normal use. So use
this pitcher sparingly, just for making test substances and for
operating the Syncrometer.
Lesson One...............................................................................
Purpose: To identify the sound of resonance in the circuit.
Materials: Potentized (homeopathic) solutions. Prepare
these as follows: find three medium-sized vitamin bottles, glass
or plastic, with non-metal lids. Remove any shreds of paper
sticking to the rim. Rinse well with cold tap water. Then rinse
again with filtered water.
Pour filtered water into the first bottle to a depth of about ½
inch. Add about 50 little grains of table salt using the tip of a
plastic knife. This is a “pinch.” Replace the lid. Make sure the