- In the sheet of gasket material, cut a hole (using your utility knife or
X-ACTO knife) large enough to slip over the 1" threads.
Use one of the PVC fittings as a template. - Use scissors to cut the outer diameter of the gasket about^3 ⁄ 8 " larger
than the inner diameter. - Repeat Steps 1 and 2 to create a second gasket.
Whenever you cut with a utility knife or an X-ACTO knife, wear leather
work gloves to reduce the chance of cutting yourself if the knife slips.
- Glue a 16", 1"-diameter PVC pipe into the female end of the 90° fitting.
- Glue the male end of the 90° fitting into the slip fit end of the 1" x 1"
fitting.
Gaskets 1" thread x 1" slip fitting
1" thread x ¾" slip fitting 1" x 1" 90° slip fitting 1" PVC pipe
Figure 6-10:
Put the
fittings
together
like this.
Chapter 6: Focusing Sound with a Parabolic Microphone 127