untitled

Follow these steps to hook up and operate the puppet:

1. Plug the phono plugs from one of the tactile switches into the box and
   press the switch.
   If the sound is too soft or too loud, adjust the potentiometer to get the
   sound level right.


2. Unplug the phono plugs and insert the electronics box in the puppet,
   taking care not to move the tactile switches out of position.


3. Insert each phono plug in a phono jack and tuck the wires out of site,
   as shown in Figure 7-20.

Trying It Out..................................................................................................

At this point, the puppet is ready to go. Press a hand or the little guy’s nose,

and listen to what he has to say.

Figure 7-20:

The

electronics

concealed

in the

puppet.

Chapter 7: Murmuring Merlin 163