Tape Measure Glue-Insertion Tool
I
’M SURE MOST WOODWORKERShave been faced with the problem
of trying to force glue into a tight split or crack in the workpiece.
My solution for this problem is to cut a 6-in. or so section from an
old tape measure. Then I cut a profile on the end of the tape, varying
the shape for different applications. The tape section is thin but stiff,
and it’s ideal for working glue into a crevice.
—GREGORYH. JOY,Lincoln, Nebr.
GLUINGCut profile on end to work glue into crack.Section of old
tape measure