Edge-Gluing Setup
Handles Angled Boards
A
FTER MANY TRIALS ANDsome wasted materials, I finally discovered
this effective technique for clamping boards that are at a slight
angle. Dry-run the clamping until the stops are located perfectly. I’d rec-
ommend using a slow-setting glue such as Franklin hide glue. If needed,
clamp the central area of the boards by running a caul across them with a
clamp on each side.
—W.G.SHEARD,Horseheads, N.Y.
CLAMPING
Clamp
Fixed stop
Adjust stops until joint is
properly aligned.
Clamping pad