Simulink Control Design™ - MathWorks

To configure your model to save simulation output in a single object, in the Simulink editor, select Simulation > Model Confi ...

If the Simulink model is not configured to save simulation output as a single object, the data structure is a variable in the M ...

Settings Default: Off On Save the operating points. Off Do not save the operating points. Dependencies Save data to workspace on ...

For the Linear Analysis Plots blocks, this parameter has no effect because no bounds are included by default. If you want to use ...

Command-Line Information Parameter: enabled Type: character vector Value: 'on' | 'off' Default: 'on' See Also Plot Linear Charac ...

Stop simulation when assertion fails Stop the simulation when a bound specified in the Bounds tab is violated during simulation, ...

Output assertion signal Output a Boolean signal that, at each time step, is: True ( 1 ) if assertion succeeds; that is, all bou ...

Show plot on block open Open the plot window instead of the Block Parameters dialog box when you double-click the block in the S ...

You must click this button before you simulate the model to view the system characteristics or signal. You can display additiona ...

This button is available only if you have Simulink Design Optimization software installed. See Also “Design Optimization to Mee ...

Trigger-Based Operating Point Snapshot Generate operating points, linearizations, or both at triggered events Library Simulink C ...

falling: the signal crosses zero while decreasing. either: the signal crosses zero while either increasing or decreasing. funct ...

Objects — Alphabetical List 17 ...

BlockDiagnostic Diagnostic information for individual block linearization Description When you linearize a Simulink model, you c ...

ContributesToLinearization — Flag indicating whether the block numerically influences the model linearization 'Yes' | 'No' Flag ...

Block linearization, specified as a state-space model. LinearizationMethod — Linearization method 'Exact' | 'Perturbation' | 'Bl ...

Obtain Diagnostics for Potentially Problematic Blocks Load Simulink model. mdl = 'scdpendulum'; load_system(mdl) Linearize the m ...

[linsys,~,info] = linearize(mdl,io,opt); advisor = info.Advisor; Obtain diagnostic information for the saturation block. satDiag ...

When troubleshooting linearization issues using the Linearization Advisor, diagnostic information for Simscape states and inputs ...

Introduced in R2017b 17 Objects — Alphabetical List ...