Off
Do not output a Boolean signal to indicate assertion status.Tips
- Use this parameter to design complex assertion logic. For an example, see “Verify
Model Using Simulink Control Design and Simulink Verification Blocks” on page 14-
25.
Command-Line Information
Parameter: export
Type: character vector
Value: 'on' | 'off'
Default: 'off'
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
Show plot on block open
Open the plot window instead of the Block Parameters dialog box when you double-click
the block in the Simulink model.
Use this parameter if you prefer to open and perform tasks, such as adding or modifying
bounds, in the plot window instead of the Block Parameters dialog box. If you want to
access the block parameters from the plot window, select Edit or click.
For more information on the plot, see Show Plot on page 16-39.
Settings
Default: Off
On
Open the plot window when you double-click the block.Nichols Plot