SolidWorks 2010 Bible
Chapter 23: Dimensioning and Tolerancing Autodimensioning If the Insert Model Items feature is not likely to produce dimensions ...
Part V: Creating Drawings Tip Remember that, if necessary, you can create angle dimensions by selecting three points (vertex of ...
Chapter 23: Dimensioning and Tolerancing Dimension Text The Dimension Text panel enables you to add text to the dimension. You c ...
Part V: Creating Drawings Although you can also control dual dimension defaults in the Options dialog box by choosing Tools ➪ Op ...
Chapter 23: Dimensioning and Tolerancing Witness/Leader Display This panel enables you to set the arrows and dimension lines to ...
Part V: Creating Drawings l (^) Center the dimension between the witness lines l Apply inspection dimension l (^) Offset the tex ...
Chapter 23: Dimensioning and Tolerancing Note You can also add tolerances to dimensions in models; the tolerance is brought in w ...
Part V: Creating Drawings FIGURE 23.17 The Geometric Tolerance settings Using Dimension Styles You can use dimension styles to a ...
Chapter 23: Dimensioning and Tolerancing Open the part from the CD-ROM called Chapter 23 Tutorial.sldprt. Open the drawing from ...
Part V: Creating Drawings FIGURE 23.19 The drawing after dimensions have been deleted and moved Select the.188 diameter dimensi ...
Chapter 23: Dimensioning and Tolerancing FIGURE 23.21 Creating a Geometric Tolerance control frame In the Right view that shows ...
Part V: Creating Drawings FIGURE 23.23 Adding more dimensions and annotations Summary The argument about how to set up and use d ...
CHAPTER Working with Tables and Drawings IN THIS CHAPTER Creating the Bill of Materials Inserting and displaying Design Tables U ...
Part V: Creating Drawings FIGURE 24.1 A sample BOM BOMs are made in one of two ways. The default BOM is made from a special Soli ...
Chapter 24: Working with Tables and Drawings ........................................................................ FIGURE 24. ...
Part V: Creating Drawings Table anchor A table anchor locks a corner of the table to a selected point on the drawing sheet forma ...
Chapter 24: Working with Tables and Drawings The Parts only BOM ignores subassembly structure and only displays parts in an un-i ...
Part V: Creating Drawings Keep Missing Items When you are making changes to a model, parts are often either suppressed or delete ...
Chapter 24: Working with Tables and Drawings FIGURE 24.5 The BOM Contents interface Controlling the appearance of the table-base ...
Part V: Creating Drawings To move the table, click outside the upper-left corner and drag the table to a new location. When the ...
«
36
37
38
39
40
41
42
43
44
45
»
Free download pdf