SolidWorks 2010 Bible
Chapter 29: Using SolidWorks Sheet Metal Tools ....................................................................... The bends ...
Part VII: Working with Specialized Functionality FIGURE 29.3 The FeatureManager after the Base Flange is added Gauge tables enab ...
Chapter 29: Using SolidWorks Sheet Metal Tools FIGURE 29.4 A sample Gauge Table and Sheet Metal PropertyManager Thickness The pa ...
Part VII: Working with Specialized Functionality Bend Allowance You can control the Bend Allowance by using one of four options: ...
Chapter 29: Using SolidWorks Sheet Metal Tools This Neutral Plane can be at various places across the thickness, depending on th ...
Part VII: Working with Specialized Functionality The specific formulas for finding these numbers are not as important as an intu ...
Chapter 29: Using SolidWorks Sheet Metal Tools of special properties that are not seen in other features. The first is that it r ...
Part VII: Working with Specialized Functionality FIGURE 29.9 The Merge Faces option showing on (selected) and off (unselected) M ...
Chapter 29: Using SolidWorks Sheet Metal Tools Note You can export a *.dxf file of the Flat Pattern directly from the model with ...
Part VII: Working with Specialized Functionality Edit Flange Profile The Edit Flange Profile button in the Edge Flange PropertyM ...
Chapter 29: Using SolidWorks Sheet Metal Tools FIGURE 29.12 Specifying the gap distance Gap FIGURE 29.13 Establishing the limit ...
Part VII: Working with Specialized Functionality Trim side bends In situations where a new flange is created next to an existing ...
Chapter 29: Using SolidWorks Sheet Metal Tools FIGURE 29.15 Curved Edge Flanges on a part Notice bend reliefs where they are not ...
Part VII: Working with Specialized Functionality FIGURE 29.16 The Miter Flange PropertyManager and a sample part Tip When select ...
Chapter 29: Using SolidWorks Sheet Metal Tools FIGURE 29.17 The Start/End Offset settings for a Miter Flange End Offset Start Of ...
Part VII: Working with Specialized Functionality You can edit the profile of the Hem, like an Edge Flange, to control the length ...
Chapter 29: Using SolidWorks Sheet Metal Tools Tip Problems can sometimes arise when you are using configurations that change si ...
Part VII: Working with Specialized Functionality FIGURE 29.20 The Sketched Bend PropertyManager Closed Corner feature The Closed ...
Chapter 29: Using SolidWorks Sheet Metal Tools Faces to Match The faces selected in the Faces to Match selection box act as an “ ...
Part VII: Working with Specialized Functionality Coplanar faces When the Coplanar option is selected, any faces that are coplana ...
«
43
44
45
46
47
48
49
50
51
52
»
Free download pdf