colour then you should keep an eye on the
texture and smell of the solution that you are
flushing out. When this changes your flush has
worked.
(5) Quickly take your plant to a warm dry area
and wait for the soil to dry out.
(6) Use a pH meter to test the pH of your soil.
(7) Follow step D.
STEP C.
IF YOU DO NOT HAVE HOLES AT THE BOTTOM OF YOUR
POT
(1) You can use a screwdriver to make holes in
your pot if it is light and the plastic is not
tough. You can always use thick masking tape
later to patch the holes closed. If you can do
this then do and follow step B.
(2) If you can not then you need to do an
emergency transplant.
(3) Quickly set up a new pot and put in new
soil leaving a large gap in the middle where
your plant will go in.
(4) Take your plant and use a knife to cut
around the edge of the soil as close to the rim
of the pot as possible. Go as deep as you can.
(5) Put you fingers in down around the inside
of the rim and pull the plant out of the pot.
