Picture Yourself Making Jewelry and Beading

19.Pull the wire through the leaf shape with the
spiral on the back. On the front of the leaf
shape, add seed beads to the wire. When
you have added enough beads on the wire
to fill the distance between the two holes
in the leaf shape, bend the wire down at a
90-degree angle and thread it through the
hole at the bottom point of the leaf shape.
When the wire is through the back of the
leaf shape, use the round nose pliers and curl
the end of the wire into a spiral. Make sure
the wire with the seed beads is tight across
the front. Bend the spiral flat against the
back of the leaf shape to hold the wire and
seed beads firmly in place.