FPL–RP–283. Madison, WI: U.S. Department of Agricul-
ture, Forest Service, Forest Products Laboratory. 24 p.
Gerhards, C.C. 1979. Effect of high-temperature drying on
tensile strength of Douglas-fir 2 by 4s. Forest Products
Journal. 29(3): 39–46.
Gerhards, C.C. 1982. Effect of moisture content and tem-
perature on the mechanical properties of wood: an analysis
of immediate effects. Wood and Fiber. 14(1): 4–36.
Green, D.W.; Evans, J.W. 1994. Effect of ambient tem-
peratures on the flexural properties of lumber. In: PTEC
94 timber shaping the future: Proceedings, Pacific timber
engineering conference; 1994 July 11–15; Gold Coast, Aus-
tralia. Fortitude Valley MAC, Queensland, Australia: Timber
Research Development and Advisory Council: 190–197.
Vol. 2.
Green, D.W.; Evans J.W.; Logan J.D.; Nelson, W.J. 1999.
Adjusting modulus of elasticity of lumber for changes in
temperature. Madison, WI: Forest Products Society. Forest
Products Journal. 49(10): 82–94.
Green, D.W.; Rosales, A. 1996. Property relationships for
tropical hardwoods. In: Proceedings, international wood
engineering conference; 1996 October 21–31; New Orleans,
LA. Madison, WI: Forest Products Society: 3-516–3-521.
Hearmon, R.F.S. 1948. The elasticity of wood and plywood.
Special Rep. 7. London, England: Department of Scientific
and Industrial Research, Forest Products Research.
Hearmon, R.F.S. 1961. An introduction to applied anisotro-
pic elasticity. London, England: Oxford University Press.
Kollmann, F.F.P.; Cote, W.A., Jr. 1968. Principles of wood
science and technology. New York: Springer–Verlag.
Koslik, C.J. 1967. Effect of kiln conditions on the strength
of Douglas-fir and western hemlock. Rep. D–9. Corvallis,
OR: Oregon State University, School of Forestry, Forestry
Research Laboratory.
Kretschmann, D.E.; Bendtsen, B.A. 1992. Ultimate tensile
stress and modulus of elasticity of fast-grown plantation lob-
lolly pine lumber. Wood and Fiber Science. 24(2): 189–203.
Kretschmann, D.E.; Green, D.W.; Malinauskas, V. 1991.
Effect of moisture content on stress intensity factors in
Southern Pine. In: Proceedings, 1991 international timber
engineering conference; 1991 September 2–5; London.
London: TRADA: 3.391–3.398. Vol. 3.
LeVan, S.L.; Winandy, J.E. 1990. Effects of fire-retardant
treatments on wood strength: a review. Wood and Fiber
Science. 22(1): 113–131.
Little, E.L., Jr. 1979. Checklist of United States trees (native
and naturalized). Agric. Handb. 541. Washington, DC: U.S.
Department of Agriculture. 375 p.
MacLean, J.D. 1953. Effect of steaming on the strength of
wood. American Wood-Preservers’ Association. 49: 88–112.
MacLean, J.D. 1954. Effect of heating in water on the
strength properties of wood. American Wood-Preservers’
Association. 50: 253–281.
Mallory, M.P.; Cramer, S. 1987. Fracture mechanics: a tool
for predicting wood component strength. Forest Products
Journal. 37(7/8): 39–47.
Mark, R.E.; Adams, S.F.; Tang, R.C. 1970. Moduli of rigid-
ity of Virginia pine and tulip poplar related to moisture con-
tent. Wood Science. 2(4): 203–211.
McDonald, K.A.; Bendtsen, B.A. 1986. Measuring local-
ized slope of grain by electrical capacitance. Forest Products
Journal. 36(10): 75–78.
McDonald, K.A.; Hennon, P.E.; Stevens, J.H.; Green, D.W.- Mechanical properties of salvaged yellow-cedar in
southeastern Alaska—Phase I. Res. Pap. FPL–RP–565.
Madison, WI: U.S. Department of Agriculture, Forest Ser-
vice, Forest Products Laboratory.
Millett, M.A.; Gerhards, C.C. 1972. Accelerated aging: re-
sidual weight and flexural properties of wood heated in air
at 115°C to 175°C. Wood Science. 4(4): 193–201.
Nicholas, D.D. 1973. Wood deterioration and its prevention
by preservative treatments. In: Degradation and Protection
of Wood. Syracuse, NY: Syracuse University Press. Vol. I.
Pillow, M.Y. 1949. Studies of compression failures and their
detection in ladder rails. Rep. D 1733. Madison, WI: U.S.
Department of Agriculture, Forest Service, Forest Products
Laboratory.
Sliker, A.; Yu, Y. 1993. Elastic constants for hardwoods
measured from plate and tension tests. Wood and Fiber
Science. 25(1): 8–22.
Sliker, A.; Yu, Y.; Weigel, T.; Zhang, W. 1994. Orthotropic
elastic constants for eastern hardwood species. Wood and
Fiber Science. 26(1): 107–121.
Soltis, L.A.; Winandy, J.E. 1989. Long-term strength of
CCA-treated lumber. Forest Products Journal. 39(5): 64–68.
Timell, T.E. 1986. Compression wood in gymnosperms. Vol.
I–III. Berlin: Springer–Verlag.
U.S. Department of Defense. 1951. Design of wood aircraft
structures. ANC–18 Bull. Subcommittee on Air Force–Navy
Civil Aircraft, Design Criteria Aircraft Commission. 2nd ed.
Munitions Board Aircraft Committee.
Wangaard, F.F. 1966. Resistance of wood to chemical degra-
dation. Forest Products Journal. 16(2): 53–64.
Wilcox, W.W. 1978. Review of literature on the effects of
early stages of decay on wood strength. Wood and Fiber Sci-
ence. 9(4): 252–257.
Chapter 5 Mechanical Properties of Wood