Mechanical APDL Basic Analysis Guide

"Vector" Data

Item Component Item Component Item Component

VF X, Y, Z CSG X, Y, Z JS X, Y, Z

X, Y, Z, XY, YZ,

XZ

CG X,Y,Z DF X,Y,Z EPDI

LS (ALL) LEPEL (ALL) SMISC (ALL)

"Scalar" Data

TEMP MACH STRM NDEN NVIS PTOT

TBOT HEAT FLOW AMPS FLUX ECON

TE2 PRES VOLT MAG PCOE

TTOT HFLU HFLM TCON EVIS

Table 7.3: Examples of Non-Summable POST1 Results

"Vector" Data

Item Component Item Component Item Component

SEPL, SRAT,

HPRES, EPEQ,

PSV, PLWK

X, Y, Z, XY, YZ, NL

XZ

X, Y, Z, XY, YZ, EPTH

XZ

EPPL

FMAG X, Y, Z BFE TEMP LEPTH (ALL)

LEPPL (ALL) LEPCR (ALL) NLIN (ALL)

LBFE (ALL) NMISC (ALL)

"Scalar" Data

EPSW SENE KENE JHEAT

Table 7.4: Examples of Constant POST1 Results

"Vector" Data

Item Component

CENT X, Y, Z

"Scalar" Data

VOLU

7.3.4. Mapping Results onto a Different Mesh or to a Cut Boundary

Just as the PDEF command (Main Menu> General Postproc> Path Operations> Map onto Path)
maps results onto an arbitrary path in the model, POST1 also has the ability to map results on to an
entirely new mesh or to a portion of a new mesh.This functionality is mainly used in submodeling,
where you initially analyze a coarse mesh, build a finely meshed submodel of a region of interest, and
map results data from the coarse model to the fine submodel.

POST1 offers two options for mapping results to a different mesh:

Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information

The General Postprocessor (POST1)