Mastering Windows Server 2016 Hyper-V

I have a management network that uses two physical switches, and each switch uses a different VLAN ...

Figure 3.14 High-level view of logical networks When planning your logical networks, try to stay as sim ...

LOGICAL SWITCH Earlier in this chapter, we created a virtual switch, and as part of that configuration options ...

Figure 3. 15 Viewing the security settings for the built-in Guest Dynamic IP virtual port profile An uplink port profile def ...

placement logic will not allow Live Migration to hosts using a different logical switch. If you have ...

present only because a virtual machine network adapter needs to connect to a VM network. If a logical network h ...

Figure 3.16 The steps for SCVMM network configuration DISABLING AUTOMATIC LOGICAL NETWORK CREATION The first actio ...

of logical networks. It may seem strange that your first configuration is to disable functionality, but it ...

Figure 3.17 Disabling the automatic creation of logical networks in SCVMM 2016 Those of you who used SCV ...

corporate DHCP servers in this example, so leave the IP subnet blank, which tells SCVMM to just config ...

Figure 3.19 Adding a single site to a logical network Here is the PowerShell code used to create my ...

on the virtual machines that get IP addresses from the IP pool. Figure 3.20 Creating a VLAN-based logica ...

Figure 3.21 Choose the site for a new IP pool or create a new one. Figure 3.22 Configuring the IP address ...

except this time you will select the One Connected Network option and the option “Allow new VM networks created on this logical ...

Figure 3.23 The complete logical network and VM network configuration So far, we have done a lot of config ...

$logicalNetworkDefinition = New-SCLogicalNetworkDefinition ` -Name "VLAN_$vlanID" -LogicalNetwork $logicalN ...

classifications. You will use the built-in objects for those, but they are easy to create, if required, using ...

Figure 3.24 Setting the options for a new uplink port profile and NIC Teaming options Figure 3.25 Selecting the ...

applied to the Hyper-V hosts. The logical switch will bring all of the components together. Follow these steps: 1 ...

Figure 3.26 Selecting the type of uplink to be used in the switch 7 . If you wish to use SR-IOV, you must ...