Tissue Engineering And Nanotheranostics

(Steven Felgate) #1
b2815 Tissue Engineering and Nanotheranostics “9.61x6.69”

182 Tissue Engineering and Nanotheranostics


on its surface was used to selectively recognize Cu2+ down to 1 nM


over K+, Na+, Ca2+, Mg2+, Ni2+, Co2+, in the aqueous solutions.^161


Another example, AuNPs transfer their energy to adsorbed cytochrome


c, and “spectral dips” are displayed in the single nanoparticle scatter­


ing spectrum, where the positions of spectral dips match the


cytochrome c absorption peak positions of about 550 nm.^167


Meanwhile, since nanoplasmonic optical sensor do not photobleach


or blink, real time production of cytochrome c in living HepG2 cells


has been dynamically imaged for long term using PRET spectros­


copy.^162 Highly sensitive and selective metal ion sensing has also been


enabled by PRET spectroscopy.163,168 Besides gold nanosphere,


nanorods are also applied as nanoplasmonic sensors to monitor the


opening process in molecular beacon.^165


In addition to offering high spatial resolution owing to the small


nanometer­scale size of the biosensor, this method is 100–1,000


times more sensitive and much more faster than organic reporter­


based methods.^166


6.1.2. Nanometal surface energy transfer


In order to describe the rate of energy transfer in NEST from a dipole


to a metallic surface interband transition, Chance et al. used a for­


mula, which is similar to FRET, however, Persson and Lang extend


this formula and create a surface energy transfer rate.169–172 Thus,


energy transfer to a surface follows a very different distance trend and


magnitude of interaction. In brief, in NEST, energy transfer distances


are much more longer than typical Förster distance (typically double),


and quenching of dyes of different emission frequencies forms the


visible range to the NIR and could be realized by the same nanopar­


ticles rather than different dyes.^164


To bring the NEST sensor into the application, metal nanoparti­


cles quench the fluorescence of the fluorophores adsorbing on the


surface by chemical binding or electrostatic interaction at first. Then,


the target molecules bind selectively to the probe and, in turn, the flu­


orescence restores. The restored intensity is proportional to the con­


centration of the target molecular structure. For instance, Ray et al.

Free download pdf