Australian Homespun - June 2018

strip. Sew the FF strip to the top edge

of the Z strip and the V strip to the

bottom edge of the Z strip. Join these

two panels to the left and right edges

of the towel from Step 38, as shown

in Diagram 8.

40

Repeat Steps 1-8 to make

another Pie block, but this

time, use dark grey print fabric #2 2in

squares instead of the taupe ones you

used before. Sew the W rectangle to

its left edge. Join the Pie+W to the

bottom edge of the unit you

assembled in Step 39. Join the pale

yellow AA rectangles to the left and

right edges of the oven window. Join

the pale yellow BB rectangles to the

top and bottom edges.

41

To make the oven feet, sew

patches together as shown

in Diagram 9. Sew this strip to the

bottom edge of the oven. The oven

base panel should measure 14^11 ⁄ 2 x

191 ⁄ 2 in from raw edge to raw edge.

ASSEMBLY AND BORDERS

42

Lay out the panels you’ve

made: potholders at the top,

with the oven dials, stove top and

oven base panels below it. Sew them

together. The quilt centre should

measure 29^1 ⁄ 2 x19^1 ⁄ 2 in from raw edge

to raw edge.

43

From the taupe print fabric, cut:

• Four strips, 1^1 ⁄ 2 in across the

width of the fabric. Trim two of them

to 21^1 ⁄ 2 in and the other two to 29^1 ⁄ 2 in

(Border 1)

• Another four strips, 1^1 ⁄ 2 in across
  the width of the fabric. Trim two of
  them to 25^1 ⁄ 2 in and the other two to
  331 ⁄ 2 in (Border 3)
  
  
  • Four strips, 2^1 ⁄ 2 in across the width
    of the fabric (Border 5).
  
  
  
  

44

From the brown check print

fabric, cut:

• Four strips, 1^1 ⁄ 2 in across the width
  of the fabric. Trim two to 23^1 ⁄ 2 in and
  the other two to 31^1 ⁄ 2 in (Border 2).

Diagram 9

CC Oven foot DD Oven foot CC

03

PROJECT

Rolling Pin block

Diagram 8

YZ

UV

EE FF