> KELBY ONE.COM
[ 25 ]› › DOWN & DIRTY TRICKSStep Seven: Go to the 3D panel and
select the main Water object. Then jump
over to the Properties panel and click
on the Coordinates tab at the top (it’s
the second icon). In the middle column,
which are the angle settings, set X to 90°
and press Enter. This will set the water
layer perpendicular to the backdrop.
Step Eight: With the Water object still
selected in the 3D panel, you’ll see a wid-
get appear above the object. Use this to
reposition the object it self. Hover over
the blue arrowhead until it turns yellow,
then click-and-drag to move the black-
filled layer up or down, depending on
where you want the waterline to be in
the photo. Next, use the green arrow-
head to slide the water layer out to the
left so that less of it is behind the back-
drop layer. This will give us more surface
from which to reflect.