SEDIMENT TRANSPORT AND EROSION 1069
Initial MotionWhite, in 1940, 20,21 using an analytical approach, showed
that, for sufficiently turbulent flow over a granular bed, thecritical shear or shear to initiate grain movement ist c k c g f^ ( S s –1) d, (5)in which k c ; 0.06; g f fluid specific weight; S s specific
gravity of sediment grain; d grain diameter.
Shields,^21 using an experimental approach, obtained the
more general equationt c g f ( S s –1) d f ( R * ), (6)
in which R * U * d n; U * friction velocity; n kinematic
viscosity; and f ( R * ) is defined in Figure 7.
Permissible or allowable tractive stresses for use in chan-
nel designs with granular or cohesive boundaries are given
by Chow.^7Bed Load FormulaeWhen the bed shear, t o , due to the flowing stream exceeds the
critical shear, t c , a part of the bed material starts to move in a
layer of the stream near the bed, i.e. the bed layer. Experimental0 0.2 0.4 0.6 0.8 1.0 1.2
Median Fall Diameter in mm.0.0010.0020.0040.0060.0080.010.020.040.060.080.10.10.20.40.60.81.01.0104.02.0Stream power,tV, lbs/ft-^
sec.Stream power,tV, gms/cmsec.Upper RegionTransitionDunesRipplesPlaneFIGURE 6 Relation of stream power and median fall diameter to bed form (after
Simons).TABLE 2
Chézy C in sand channelsRegime Bed Form Cl √g (where C is Chézy C)Lower regime
ripples d 50 0.6 mm 7.8 to 12.4
dunes 7.0 to 13.2
transition 7.0 to 20
Upper regime plane bed 16.3 to 20
anti-dune {standing wave 15.1 to 20
{breaking wavechutes and
pools“slug” flow10.8 to 16.3
9.4 to 10.7
—C019_001_r03.indd 1069C019_001_r03.indd 1069 11/18/2005 11:06:00 AM11/18/2005 11:06:00 AM