目录.p65

Steering column system.....................................

Overhaul........................................................

1. Put the front wheels towards the front.


2. Disassemble safety airbag assembly at the side of
   driver (equipping with SRS) [67000179]
   Note: if disconnecting airbag joint when ignition switch
   locates at ON position, checking number will record it.
   (a) Put the front wheels towards the front.
   (b) Use planetary sleeve wrench to loosen two planetary
   screws until the concave slot around the screw contacts
   the screw shell.
   (c) Pull out airbag assemble from steering wheel, and
   disassemble airbag joint.
   (d) Disassemble the terminal.
   Warning:
   ¡ñ¡ñ¡ñ¡ñ¡ñ When storing safety airbag assembly at the side
   of driver, it is necessary to put the surface of
   airbag assembly towards the upside.
   ¡ñ¡ñ¡ñ¡ñ¡ñ Do not disassemble airbag assembly.
   Note: when disassembling airbag assembly, pay
   attention not to pull airbag wiring harness.


3. Disassemble steering wheel assembly [67100001]

(a) Disassemble the fixed screw cap of steering wheel.

(b) Make corresponding marks on steering wheel and main

shaft assembly.

(c) Use special tool to disassemble steering wheel.

4. Disassemble upper/lower decoration plate of

steering column [64000128/64000129]

5. Disassemble left combination switch assembly

[67000078] (referring to page 298)

Steering column--Steering systemSteering column--Steering systemSteering column--Steering systemSteering column--Steering systemSteering column--Steering system

airbag joint

Wrong Correct

planetary

screw shell screws

 194 

Align the mark