Steering column--Steering systemSteering column--Steering systemSteering column--Steering systemSteering column--Steering systemSteering column--Steering system
- Disassemble right combination switch assembly
[67000079] (referring to page 302)
- Disassemble helix cable assembly (equipping with
SRS)
Note: do not disassemble helix cable or spread lubricat-
ing grease.
- Disassemble the middle connecting plate of lower
panel [68100006] (referring to page 340)
- Disassemble dust-proof cover in steering column.
Disassemble two screw caps, then take down dust-proof cover
in steering column.
- Disassemble steering shaft assembly
(a) Disconnect joint and fixed clap of wiring harness.
(b) Loosen three fixed bolts of steering column assembly.
- Disassemble the clamp of ignition switch [68000020]
(a) Use central punch to make hole on the central part be-
tween two tapered bolts.
(b) Use 3-4 mm aiguille to drill two bolts.
(c) Use bolt screwdriver to disassemble two bolts, then take
down ignition switch clamp.
- Disassemble electronic anti-stealing loop assem-
bly (assembling with enter illumination system)
[67000009].
195
Bolt screwer
