Power steering--Power steering gear assembly- Connect the ball head at the right side of transver
sal lever. - Assemble right bottom defending board of engine
[68000004]. - Assemble left bottom defending board of engine
[68000003].- Assemble front wheel
Torque: 103 ± 10 Nxxxxxm- Connect steering slide shaft assembly.
(a) Align the mark between steering middle shaft and sliding
shaft.
(b) Assemble B bolt.
Torque: 35 ± 3 Nxxxxxm
(c) Tighten the A bolt.
Torque: 35 ± 3 Nxxxxxm- Assemble inner dustproof cover of steering column [64000123].
Assemble inner dustproof cover of steering column with two screw caps.- Make front wheel face the front
Hint: lift up front wheel shaft.- Assemble helix cable assembly (equipping with SRS).
- Assemble steering wheel assembly [67010001].
(a) Align the mark between steering wheel and main shaft of steering column.
(b) Lock the fixed screw cap of steering wheel temporarily.- Add power steering oil (referring to page 200).
- Exhaust the air in power steering system (referring to page 200).
- Check the central point of steering wheel.
(a) Check the central point of steering wheel.
(b) Lock the fixed screw cap of steering wheel.
Torque: 50 ± Nxxxxxm- Assemble safety airbag assembly at the side of driver (equipping with SRS) [67010011].
- Check whether there is oil leakage.
- Check the engine cover assembly.
- Adjust the engine cover assembly.
- Check and adjust the front wheel alignment (referring to page 87).
212