目录.p65

Supplemental restraint system--Note

Special tools and measurers which any safety airbag repairing position should have:

Changeable subassembly which safety airbag repairing position should have:
a. Safety airbag assembly at the side of driver;
b. Safety airbag assembly at the side of passanger;
c. Helix cable assembly.
d. ECU assembly;
e. Steering wheel.

I. Safety airbag joint

No. Item Applicable

(1) Terminal dual-locking organization

(2) Airbag anti-explosive organization Joint 3, 4, 7, 8

(3) Checking organization of electric circuit connection

(4) Inadequacy connection protection organization Joint 4

(5) Joint dual-locking organization Joint 2

(6) Joint dual-locking organization Joint 6, 7, 10

Safety airbag at the

side of passenger

Safety airbag at

the side of driver

Helix

cable

Airbag controller

1. All safety airbag joints should be yellow to be easy to distinguish the joints on other automobile parts,
   this could guarantee the safety performance and reliability of safety airbag joint, each kind of joint has
   special function and design.

 240 

Number

a

b

c

d

e

Function

Disassemble airbag subassembly on steering wheel

Assemble and disassemble big nut on steering column

Assemble and disassemble ECU and safety airbag assembly

at the side of passenger on automobile body.

Used for electric measurement on wiring harness

Used for resistance measurement of electric ignition device

of airbag subassembly.

Name and type of tool

5S hexagon wrench

Socket wrench 18S

14S socket wrench

Numeric multi-meter DT 992 type

Electric detonator tester

QJ992 type

Short

wiring

harness