Simulink Control Design™ - MathWorks

Update Simulink Model and Validate Design

This example shows how to update compensator blocks in a Simulink model and validate

a control system design.

To tune a control system for a nonlinear Simulink model, Control System Designer

linearizes the system. Therefore, it is good practice to validate your tuned control system

in Simulink.

1 Tune your control system using Control System Designer.

For an example, see “Design Compensator Using Automated PID Tuning and

Graphical Bode Design” on page 9-17.

2 Insure that the control system satisfies the design requirements.

In Control System Designer, analyze the controller design. For more information,

see “Analyze Designs Using Response Plots” on page 9-38.

3 Write tuned compensator parameters to your Simulink model.

In Control System Designer, on the Control System tab, click Update

Blocks.

4 Simulate the updated model.

In the Simulink model window, click.

5 Verify whether your compensator satisfies the design requirements when simulated

with your nonlinear Simulink model.

See Also

Control System Designer

More About

• “Design Compensator Using Automated PID Tuning and Graphical Bode Design” on
  page 9-17

Update Simulink Model and Validate Design