TipTo highlight the location in the Simulink model of any signal in the current list of
analysis I/O points, select the I/O point in the list, and click Highlight.
Add Analysis Point to I/O Set
To add an analysis point to the linearization I/O set:
(^1) In your Simulink model, select one or more signals that you want to add to the
linearization I/O set.
The selected signals appear in the Edit dialog box under Currently selected
signals.
(^2) Under Currently selected signals, click the signal you want to add. To select
multiple signals, hold Ctrl, and click each signal you want to add.
(^3) To add the signal to list of Analysis I/Os, click Add.
(^4) In the Configuration drop-down list for the signal, select the type of analysis point
you want to define. For example, if you want the signal to be an open-loop
linearization output point, select Open-loop Output.
Remove Analysis Point from I/O Set
To remove an analysis point from the linearization I/O set, in the Analysis I/Os section,
click the signal you want to remove, and click Delete.
Specify Portion of Model to Linearize in Linear Analysis Tool