Operating point search report for the Model scdspeed.
(Time-Varying Components Evaluated at time t=0)
Operating point specifications were successfully met.
States:
(1.) scdspeed/Throttle & Manifold/Intake Manifold/p0 = 0.543 bar
x: 0.544 dx: 2.99e-13 (0)
(2.) scdspeed/Vehicle Dynamics/w = T//J w0 = 209 rad//s
x: 209 dx: -9.9e-13 (0)
Inputs:
(1.) scdspeed/Throttle perturbation
u: 0.005 [-Inf Inf]
Outputs:
(1.) scdspeed/rad//s to rpm
y: 2e+03 [1.9e+03 2.1e+03]
The operating point search report shows that the specifications were met successfully.
After trimming your model, you can:
- Linearize your model at the resulting operating point. For more information, see
“Linearize at Trimmed Operating Point” on page 2-90. - Simulate your model at the resulting operating point. For more information, see
“Simulate Simulink Model at Specific Operating Point” on page 1-119.
See Also
addoutputspec | findop | operspec
More About
- “Compute Steady-State Operating Points from Specifications” on page 1-15
- “Compute Operating Points from Specifications Using Steady State Manager” on
page 1-23
See Also