Hardware Manual

Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-22

Saia-Burgess Controls AG

PCD2.E160/161

Input/output (I/O) modules

5

For every 2 inputs, a 3-colour LED is fitted:

Colour E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15

off L L L L L L L L L L L L L L L L

red H L H L H L H L H L H L H L H L

green L H L H L H L H L H L H L H L H

yellow H H H H H H H H H H H H H H H H

Saia-Burgess Controls provides a wide range of pre-configured cables with a 34-pole

ribbon connector at one or both ends.

These connection cables can be plugged at one end into the PCD2.E160 I/O module

and at the other end into an I/O terminal adapter.

The following adapters are obtainable from Saia-Burgess Controls: terminal adapters

for connecting 3-wire sensors to individual terminals for Signal, Plus and Minus;

terminal adapters for connecting 16 I/Os with and without LED and relay interface;

and terminal adapters with changeover contacts for signal conversion for digital

output modules.

For further details, please refer to TI 26/326.

The following materials can be ordered from ‘3M’:

● Socket connector 34-pole Type 3414-6600

● (Metal strain relief) *) Type 3448-2034

● (Handle for socket connector 34-pole) *) Type 3490-3

Matching cables can be ordered in reels from ‘3M’:

● Ribbon cable 34-pole,

grey with pin 1 identification Type 3770/34 or 3801/34

● Round cable 34-pole,

grey with pin 1 identification Type 3759/34

*) optional