cylinders is the screen. The cannabis trim is
placed inside this screen and a small motor
attached to the side rotates the drum. As it
rotates, very slowly (2 rotations a minute),
the trichomes drop through the sieve onto the
surface stand between the legs of the drum. A
simple mirror or sheet of glass is best used to
catch the skuff. You can keep the tumbler
rotating for up to 1 hour to get the most from
your skuff without applying any pressure. If
you want to apply more pressure to the skuff
then place a small wooden cylinder in with the
barrel. This will help press the skuff as it
passes under the cylinder. Different sized
screens can be used to extract better quality
skuff.
Water Extraction:
Resin glands can be removed from the
cannabis plant by agitating the trim in cold
water, typically ice cold water or water that
has been chilled in a fridge overnight. The
trim is placed in a bucket and the cold water
is poured in on top. The whole lot is swirled
or mixed around using a blender. After mixing
you let it sit for a few minutes before
scooping out the skuff that is floating on the
surface. The remaining liquid is strained
through a sieve. By sieving this liquid through
a coffee sieve you will be able to collect most
