http://www.britpart.com
MONTHLYTECHNICAL
134 LANDROVER MONTHLY
Projects,repairs,modifi cationsandadviceguide
Hold the head
9
Yo u may need hold the bolt headto
stop it from spinning in the hinge.In
theworst cases, seized nuts may needto
becut offwith a grinder.
Check
10
Beforefi tting the hinge guards,
check the instructionssoyou know
which guardgoeswhere,as thetop and
bottom guards are different.
Correct way
12
Fit the guards with thecut out onto
thetop hinge bolts, with thecurved
sideawayfrom the door frame, thenrefi t
the hinge nuts.
Window handle tip
16
Before refi tting the window winder
handle, check theretaining spring
clip is fullyreleased (in this position)
before refi tting ontotheregulator spindle.
Positionalcheck
15
With both hinge guards now in
position, check the guards are both
correctly positioned when the door closes.
Thenrefi t the doorcard.
Double check
17
With the doorcardnowback in
position check again that the door
still closescorrectly and the hinge guards
don’tcatch the doorseal. Job done.
Warning
11
There arewarning ‘finger trap’
stickersto gooneachofthe hinge
guards.Theseare best stuck in position
beforethe guards arefi tted.
Adjustment
13
Set the guard plateasstated in the
instructionssothat, when the door is
closed, there is thecorrectgap between
plateand bulkhead, then tighten the nuts.
Lower hinge
14
Fit the guard without thecut-outto
the lower hinge.Curved sidefaces
awayfrom door frame allowing thecorrect
gap.Thenrefi t and tighten the nuts.