Radio Control Jet International - April-May 2018

The main screen shows that the software is ready for the

ER-50 class of retracts, and the type of battery to use

This screen shows the “status” of the dedicated

battery, the position of L/G, doors, and brakes

Through this menù we can operate the gear and

open the doors without need for a transmitter

The main menu screen Just like a turbine ECU, the GS-200 must learnthe position of the L/G and brake switches This screen shows the status of the L/G, brake pulsewidth and brake control mode (here 2ch mode)

The brake adjust and limit menus allow exact setting of the mixing, gyro and brake limits Menu to set the centre, travel and gyro gain of the steering servo

Do you need the nose leg to go to a specific

position when retracting? No problem!

The easy to set and very clear sequencer: we may set up to 10 steps to have

the L/G and doors follow a desired sequence of movements, timed as we need.

AUTHOR: MARCO BENINCASA

We can select exactly how the system responds upon switch-on using one of these three options

GS 200_Layout 1 08/03/18 13.10 Pagina 4