Scale Aviation Modeller International – September 2019
minor efect on the white if you looked closely. The cockpit masking came of and that area could be completed. The canopy is supp ...
T his build is of the Special Hobby ‘High Tech’ release of their Hawker Tempest V. There are two versions of this kit available, ...
good, and it will be interesting to see if the supplied cowlings it properly and allow for a closed and open display option. CMK ...
SEPTEMBER 2019 • SCALE AVIATION MODELLER INTERNATIONAL 1/32 24 ...
PAINTING AND DECALING On to the painting now and here I experimented by applying a base of Model Master Aluminium over Tamiya Ru ...
being especially thin. Having said that, I had to apply heap of Micro Sol as the rivet and panel detailing was so ine that even ...
Incorporating the IPMS (UK) National Competition The International Centre Telford Shropshire TF1 4JH Sunday 10 th November 2019 ...
FIRST LOOKS: Wingnut Wings 1/32 Gotha UWD, Mark One Models 1/144 Mirage IIIc, Eduard 1/48 North American P-51D-5 Mustang^ REVIEW ...
A I enclose a £ Sterling cheque made payable to ‘MA Publications Ltd’ B Please charge my Visa Mastercard American Express Maestr ...
T he MiG-21 was built in Russia and then exported to numerous satellite states, such as Vietnam. The early version of the aircra ...
Airbrakes (#648146) and an entrance ladder (#48704). The big thing about the BigSin set is the saving on the total price. If tha ...
out, I opened the holes on the wings for the AA-8 missiles that I wanted to add later. FUSEALGE I also added some weight to the ...
DECALS The Eduard decals were on two sheets. The irst was a stencil sheet and the other was the markings for the particular airc ...
the interior set, so I built it and could add it anytime and anywhere to add visual interest. CONCLUSION Now the model was done ...
...
D uring the Six-Day War, fought between 5 and 10 June 1967, Israel chose to deploy its Mirage III leet ofensively over the demil ...
engine and nacelle were glued into one half of the fuselage. The fuselage was then closed up and the internal cones for the air ...
the entire model over several very thin coats, just enough to cover the pre-shading but still keeping it fairly visible as I am ...
paper towel, I decided to allow the wash to completely dry over a few hours and then remove with an old worn our Blue Sanding St ...
very smooth, so a further gloss coat was not needed. The next stage was to add some tonal variation into the camoulage patterns. ...
«
1
2
3
4
5
»
Free download pdf