TOYOTA PREVIA 91-97 REPAIR MANUAL

ENGINE AND ENGINE OVERHAUL 3-5 ENGINE MECHANICAL SPECIFICATIONS Description English Specifications Metric Specifications Cranksh ...

3-6 ENGINE AND ENGINE OVERHAUL Engine REMOVAL & INSTALLATION In the process of removing the engine, you will come across a n ...

ENGINE AND ENGINE OVERHAUL 3-7 Rocker Arm (Valve) Cover REMOVAL & INSTALLATION I See Figures 1 thru 9 Remove the right side ...

3-8 ENGINE AND ENGINE Fig. 6 Sometimes it may be stuck to the valve cover Seal Packing Fig. 7 Apply seal packing to these 6 loca ...

ENGINE AND ENGINE OVERHAUL 3-9 Fig. 11 Remove these two nuts to access the thermostat If necessary, disconnect the lower radiat ...

3-10 ENGINE AND ENGINE OVERHAUL Intake Manifold REMOVAL & INSTALLATION Exhaust Manifold REMOVAL & INSTALLATION I See Fig ...

ENGINE AND ENGINE OVERHAUL 3-11 Fig. 19 An extension is necessary to access these nuts on the manifold Fig. 22 When installing, ...

3-12 ENGINE AND ENGINE CVERHAUL No.l Engine Under Co\. 23 Exploded view of the supercharger and related coil ponents Fig. 24 Exp ...

ENGINE AND ENGINE OVERHAUL 3-13 b. Remove the six nuts holding the supercharger to the No. 1 air out- let duct. c. Separate the ...

3-14 ENGINE AND ENGINE OVERHAUL Fig. 26 Remove the 2 nuts and 2 bolts holding the by-pas; valve to the No. 1 air inlet duct Fig. ...

ENGINE AND ENGINE OVERHAUL 3-15 Fig. 29 Unbolt and remove the air inlet duct under the hood Fig. 30 Remove the lower radiator ho ...

1-16 ENGINE AND ENGINE OVERHAUL Fig. 34 It is always a good idea to plug the line once removed Fig. 35 Remove the upper shroud r ...

ENGINE AND ENGINE OVERHAUL 3-17 Connect the radiator hoses. 17. On 1995-97 vehicles, connect the water bypass hose from the thr ...

3-18 ENGINE AND ENGINE 0 ^ERHAUL Fig. 44 Remember to discard the old gasket for the bracket Fig. 45 Remove any hoses attached to ...

ENGINE AND ENGINE OVERHAUL 3-19 Fig. 50 View of the water pump gasket mating area Equipment Driveshaft PRECAUTIONS I See Figures ...

3-20 ENGINE AND ENGINE OVERHAUL CORRECT WRONG Fig. 54 Only store the shaft in a straight line without bend ng it Fig.^57 Check a ...

ENGINE AND ENGINE OVERHAUL 3-21 Equipment Drive Shaft I forDrive Supercharge Bei! Drivefor PS and Belt Generator Fig. 59 View of ...

3-22 ENGINE AND ENGINE OVERHAUL Fig. 62 Unbolt and extract the No. 1 intake air connector bracket Fig. 63 Three bolts retain the ...

ENGINE AND ENGINE OVERHAUL 3-23 Fig. 67 Unbolt the equipment driveshaft and drive housing Fig.^70 Rotate the flange and check th ...

3-24 ENGINE AND ENGINE OVERHAUL Matchmarks Fig. 72 Align the matchmarks and install the 3 washers wi h bolts to the shaft coupli ...