目录.p65

Safety belt Note............................................................... Hint: When scraping a automobile equipping with ...

Safety belt--Front safety belt (1) Connect special tool with battery, Connect the red clamp of special tool with the anode of ba ...

Safety belt--Front safety belt (d) Explode safety belt pre-tension crimper. (1) Confirm there is no one in automobile and in 10m ...

Safety belt--Front safety belt Subassembly................................................. (e) Treatment for safety belt pre-te ...

Safety belt--Front safety belt Change.......................................................... Hint: z When assembling, please ...

Rear safety belt.................................................. Subassembly................................................. ...

Safety belt--Rear safety belt . : Regulated torque 1 13 12 2 3 5 8 7 8 5 6 4 10 9 11 Inner trim board assembly of left rear c ...

Safety belt--Rear safety belt Change.......................................................... Hint: z When assembling, please w ...

Assemble middle waistband of rear row safety belt with locker assembly [68010043] (a) Use the bolts to assemble middle waistban ...

Light--Light System The phenomena table.................................... front combination lights and tail light Phenomena ...

Light--Light System  280  Fog light System Turning and emergency warning light system Emergency warning light and turn light ...

Light--Light System All lights do not light When driver cap side door opens, the light does not light When right front door open ...

(b) Inspect function of rear fog light. (1) Turn the ignition switch to ON. (2) Inspect rear fog light’s situation when every sw ...

Light--Light System (a) Turn the ignition switch to OFF and open all doors, then lock driver cap side door. (b) Unlock the drive ...

Light--Light System Switch positions Avometer terminals regular situation OFF 1-2 not conduction ON 1-2 conduction (d) Inspect c ...

Light--Light System (a) Inspect the conduction of B pillar control switch assembly (1) Inspect the conduction between terminal 1 ...

Light--Front fog light joint Front combination light (LH).............................. Subassembly............................. ...

Light--Front fog light joint Change.......................................................... Notes: z Assemble according to the ...

Light--Front fog light joint Clues on: z Adjust the focus between lights of RH and LH as the drawing. z The value of low beam fo ...

Light--Front fog light joint Front fog light..................................................... Components.................... ...