目录.p65
Check the axial clearance of bearing. Put the centimeter besides shaft hub center, and check the axial clearance of bearing. Ma ...
Left rear shaft hub bolt....................................... Change.......................................................... ...
Brake--Brake system Brake Brake system Notes.............................................................. z It is necessary to ...
Brake--Remove malfunction Remove malfunction........................................... Malfunction phenomenon table............ ...
Brake--Remove malfunction Brake block (damaged or distorted). 141, 144 Assembled nut (loose). 141, 144 Brake disk (scratched). ...
Brake--Remove malfunction Add brake liquid in storage tank. Brake liquid: DOT-4 Discharge the air in brake main pump. Hint: if ...
Brake--Remove malfunction Check the free travel of pedal. (a) Extinguish the engine, and step brake pedal repeatedly until ther ...
Change.......................................................... Hint: after assembling, check and adjust the height, free trave ...
Brake--Vacuum booster assembly Vacuum booster assembly................................. Inspection on automobile................ ...
Disconnect the U-shaped joint of brake main pump lever (a) Release fixing screw cap of lever U-shaped joint. (b) Disassemble lo ...
Brake--Vacuum booster assembly 140 Connect brake main pump Assemble U-shaped joint pin in U-shaped joint and brake pedal, and a ...
Brake--Front brake assembly Front brake assembly......................................... Overhaul.............................. ...
Brake--Front brake assembly Check the brake branch pump and piston Check whether there is rust or scratch in cylinder of branch ...
Brake--Front brake assembly 23.Assemble dustproof cover of branch pump.. (a) After spreading lithium soap base glycol lubricatin ...
Brake--Rear brake assembly Rear brake assembly......................................... Overhaul................................ ...
Brake--Rear brake assembly Use screw driver to disassemble oil seal of piston from brake branch pump. Note: do not damage cylind ...
Brake--Rear brake assembly Assemble piston of Rear brake branch pump (a) Spread lithium soap base glycol lubricating grease on ...
Brake--Rear brake assembly Assemble rear brake block. Note: when changing brake block, the inside of muffle gasket should be ch ...
Hydraulic control unit (equipping with ABS) Inspection on automobile............................... Connect handle tester (a) C ...
Brake--Hydraulic pressure control unit Disassemble gasket of right wheel wing. Disassemble hydraulic control unit and bracket. ...
«
3
4
5
6
7
8
9
10
11
12
»
Free download pdf