目录.p65
Brake--Hydraulic pressure control unit Assemble hydraulic control unit and bracket. (a) Assemble hydraulic control unit and bra ...
Brake--Speed sensor of front wheel Speed sensor of front wheel.............................. Change............................. ...
Brake--Speed sensor of rear wheels Speed sensor of rear wheels........................... Change................................ ...
Brake--Speed sensor of rear wheels 153 (c) Use special tool and press to assemble speed sensor of rear wheels to rear shaft hub. ...
Parking brake Parking brake system Malfunction phenomenon table..................... Use following table to find the reason of m ...
Parking brake handle assembly......................... Change.......................................................... Disasse ...
Parking front brake pull cable assembly Change.......................................................... Parking brake--Parking ...
Parking brake--Parking front bake pull cable assembly Assemble front bottom board bracket. Assemble parking brake handle assemb ...
Parking rear brake pull cable assembly........... Change.......................................................... Hint: the cha ...
Parking brake--Parking rear brake pull cable assembly rear wheel to fixing clamp. Assemble No.2 clapboard. Assemble front part ...
Parking brake--Parking rear brake pull cable assembly Assemble parking brake shoe adjustor. Assemble drag lever of parking brak ...
Parking brake--Parking brake assembly Parking brake assembly.................................... Overhaul....................... ...
Parking brake--Parking brake assembly Disassemble parking brake shoe assembly (LH). Use special tool to disassemble parking bra ...
Assemble parking brake exterior shoe assembly (LH). Use special tool to assemble parking brake shoe with parking shoe, localizi ...
Check the assembly of parking brake system. Check every part after assembly. Note: do not attach oil dirt or lubricating grease ...
Firstly, loosen the connecting bolt of cover, and take out cover and stop disc spring of output shaft bearing, secondly, put spe ...
Transmission—Disassemble assembly Take out interlocking pin with magnetic stick Take out clip spring of fork shaft, liking that ...
Transmission—Disassemble assembly Disassemble interlocking pin with magnetic stick and take out fork shaft and fork. Disassemble ...
Disassemble lubricating oil pipe. Take our bushing liking that shown in figure. Take our oil seal. Take our exterior ring of tap ...
Five gear Check the axial clearance of third gear with clearance gauge, its standard value is: 0.1—0.35 mm. Check the axial clea ...
«
4
5
6
7
8
9
10
11
12
13
»
Free download pdf