Simulink Control Design™ - MathWorks

On Display the filtered list of signals using a flat list format, indicating bus hierarchies with dot notation instead of using ...

Dependencies Setting this parameter to Simulation snapshots enables Snapshot times. Setting this parameter to External trigger ...

Command-Line Information Parameter: SnapshotTimes Type: character vector Value: 0 | positive real number | vector of positive re ...

Enable zero-crossing detection Enable zero-crossing detection to ensure that the software computes the linear system characteris ...

On Compute linear system characteristics at the exact snapshot time or exact time when a trigger signal is detected. This settin ...

Command-Line Information Parameter: UseExactDelayModel Type: character vector Value: 'on' | 'off' Default: 'off' See Also Plot L ...

Positive finite value. Use to compute: A discrete-time linear system from a continuous-time system. A discrete-time linear syst ...

Tustin (bilinear) Bilinear (Tustin) approximation without frequency prewarping. The software rounds off fractional time delays t ...

enables Prewarp frequency (rad/s) on page 16-301. Command-Line Information Parameter: RateConversionMethod Type: character vecto ...

See Also Plot Linear Characteristics of Simulink Models During Simulation on page 2-82 “Verify Model at Default Simulation Snaps ...

Value: 'on' | 'off' Default: 'off' See Also Plot Linear Characteristics of Simulink Models During Simulation on page 2-82 “Verif ...

Command-Line Information Parameter: UseBusSignalLabels Type: character vector Value: 'on' | 'off' Default: 'off' See Also Plot L ...

Tips Clearing this parameter disables the upper singular value bounds and the software stops checking that the bounds are satis ...

Settings Default: [] for Singular Value Plot block [0.1 100] for Check Singular Value Characteristics block Must be specified as ...

See Also Plot Linear Characteristics of Simulink Models During Simulation on page 2-82 “Verify Model at Default Simulation Snaps ...

You must click Update Block before simulating the model. Command-Line Information Parameter: UpperBoundMagnitudes Type: characte ...

Tips Clearing this parameter disables the upper bounds and the software stops checking that the bounds are satisfied during sim ...

Frequencies (rad/sec) Frequencies for one or more lower singular value bound segments, specified in radians/ sec. Specify the co ...

Value: [] | positive finite number | matrix of positive finite numbers | cell array of matrices with positive finite numbers. Mu ...

To modify the magnitudes, drag the bound segment. Alternatively, right-click the segment, and select Bounds > Edit Bound. Sp ...