Simulink Control Design™ - MathWorks

See Also More About “Linearize at Triggered Simulation Events” on page 2-100 “Visualize Linear System at Multiple Simulation Sn ...

Linearize at Triggered Simulation Events This example shows how to use the Linear Analysis Tool to linearize a model at specific ...

The model already includes a Trigger-Based Operating Point Snapshot block from the Simulink Control Design library. This block l ...

(^5) Compare linearized models at 2500, 3000, and 3500 rpm using Bode plots of the closed-loop transfer functions. bode(linsys); ...

“Visualize Linear System of a Continuous-Time Model Discretized During Simulation” on page 2-122 “Plotting Linear System Charac ...

Linearization of Models with Delays This example shows how to linearize a Simulink model with delays in it. Linearization of Mod ...

DelayBlock = 'scdspeed/Induction to Power Stroke Delay/dM//dt delay'; To compute a linearization using a first order approximati ...

p.XLim = {[0.1 1000]}; f = figure; bode(sys_1st_order_approx,sys_2nd_order_approx,sys_exact,p); h = legend('sys_1st_order_approx ...

Linearization of Models with Discrete Delays When linearizing a model with discrete delay blocks, such as (Integer) Delay and Un ...

Integrate the resulting model to see that it has 21 states (1 - Discrete Filter, 20 - Integer Delay). size(sys_default) State-sp ...

Close the Simulink model and clean up figures. bdclose(model) close(f) Linearization of Models with Delays ...

Working with Linearized Models with Delays For more information on manipulating linearized models with delays, see the Control S ...

Linearization of Models with Model References This example shows the features available in Simulink Control Design for linearizi ...

To achieve an accurate linearization, set the model reference block to normal simulation mode to allow the block-by-block linear ...

Close the Simulink model. bdclose('scdspeed_ctrlloop'); Another benefit of switching the model reference to normal mode simulati ...

For more information on linearizing models with delays see the example "Linearizing Models with Delays". See Also linearize 2 Li ...

Visualize Linear System at Multiple Simulation Snapshots This example shows how to visualize linear system characteristics of a ...

TipIf your model already contains I/O points, the block automatically detects these points and displays them. Click at any time ...

TipYou can select multiple signals at once in the Simulink model. All selected signals appear in the Click a signal in the model ...

ii Click to add the signal to the Linearization inputs/outputs table. iii In the Configuration drop-down list of the Linearizati ...