Scale Aviation Modeller International 08.2018

YOU NEED THIS MAGAZINE! ANOTHER PERFECT STORM Special Hobby 1/32 Tempest FULL METAL JACKET HobbyBoss 1/32 F-84G Thunderjet QUICK ...

CHANGE THE WAY YOU PAINT WWW.MISSIONMODELSUS.COM Please see our dealer locator at http://www.missionmodelsus.com MISSION PREMIUM ...

1/ AUGUST 2018 # 82119 http://www.eduard.com NEW TOOL Bf 109G- 10 Mtt Regensburg Mail Order: (all major credit cards accepted) H ...

14 Full Metal Jacket HobbyBoss 1/32 F-84G Thunderjet by Guy Goodwin FREE KITS! N ow that was a shameless way to catch your eye, ...

has the same upper colours but black undersides. There are two markings and decal placement sheets, in full-colour, and a 32 pag ...

Zoukei-Mura 1/48 Phantom F-4D by Peter Marshall I t would seem that Zoukei- Mura (ZM) are going to give us new moulds of a lot o ...

has the same upper colours but black undersides. There are two markings and decal placement sheets, in full-colour, and a 32 pag ...

have a separate bottle, visible in a cut-out at the bottom left of the seat back. It’s a minor point, but this (and the absence ...

like features sticking up, and the instructions would have you remove one of them. I removed both, as I couldn’t see either on a ...

The inner rear flaps, ailerons, and two-part inner wing leading edge flaps are all separate, which is nice, but the outer wing ...

PAINTING AND DECALS I did the underside in Xtracolor X140 FS36622 Light Grey, followed by X29 RAF Light Stone for the Sand, X2 R ...

shiny parts round the exhausts (SUCH a good fit), the exhausts, a few small clear parts (I often find tiny clear parts a bit of ...

an ALQ-87 in one of the front Sparrow bays, and GBU-10 Paveway I LGBs on the inner wings. This is a configuration used either wi ...

HobbyBoss 1/32 F-84G Thunderjet by Guy Goodwin I ’ve mentioned before my love of high-end kits – Tamiya, Wingnut Wings, etc. – s ...

to break off. Above 15,000 ft the F-84 could be flown faster but at the expense of severe buffeting. The top speed limitation pr ...

extras, I would at the very least upgrade the seat. Unfortunately, I could not find an F-84 seat in this scale, but I did manage ...

and was certainly very smooth. However, it wasn’t as tough as I would have liked; when it came to masking the panels in the latt ...

be sealed in to stand a chance. After many reels of Tamiya tape, I had the basic airframe complete. This was finished with Futur ...

easily fixed with aftermarket parts. And as I have said, the kit’s decals looked a little suspect to me, but I think mine may ha ...

Eduard 1/48 FW-190A-4 by Floyd S. Werner, Jr. E duard has covered The Focke Wulf 190 series before but they stopped at the A-5 v ...